Automotive

Laser system for quality control of cutting and drilling The LDV system is a laser device that makes automatic and certain the control of the presence of holes and cuts made by Laser machines on 3D and 2D sheet metal parts. The control is performed in less than 1 second. The system projects points and lines on the position of the holes and cuts made onto the cut and drilled stringers. At this point, the dynamic control part will be able to signal the presence or absence of the machining. The operating principle is simple and can guarantee the infallibility of the system. The Laser LDV system has been developed to self-control through redundancy systems to avoid signaling errors and make the quality of the control total, reporting any internal malfunction in real time. The system is equipped with a micro PC that, in addition to recording each work cycle, can photograph and catalogue the machined parts, creating a report and also reporting which area has not been machined. The remote assistance function is also provided where a remote operator can check the functionality of the system, reprogram the control masks and ensure continuity of work

Laser Profilometer for high precision dimensional measurements, quality control, position measurements of painting lines and dimensional control of wooden boards and marble tables. The LSR system has a tested software that can interface with robots and automated lines. LSR is a laser artificial vision device with different configurations and precisions, therefore adaptable to any customer need

LDS laser sensors Developed for industrial applications are used for collision avoidance, level measurement of liquids and solids, conveyor profiling, proximity sensing, positioning and monitoring of equipment or even altimetry applications. Varying material characteristics or differences in environmental conditions can be a contributing factor to a particular sensor not working properly. LDS lasers are Class I lasers, they are low power (

The Logic Device is designed for vertical warehouses, for loading and unloading on the bench without errors for the storage and picking operator. It is equipped with two lasers: a green laser (line) that projects the picking "row" and a red light laser (point) that projects the loading \ unloading "drawer". Cod: 3362599463

The LSF 13 ATP projector is a laser projection device based on a galvanometric system, capable of creating points and complex figures on the work surface. The LSF13 ATP laser device is an innovative projection system that overcomes the critical positioning issues in the automotive sector. It was designed for the work of operators on assembly lines. The main function is to signal the assembly directives given to the operator via a PLC/computer/analog signals.

The OEM laser series has been created by us to produce the laser according to the customer's specifications starting from the color of the laser source to its power supply from batteries up to 110\240V. The Housing can be chosen based on the application all with a size of Ø12mm. The OEM series is the most versatile there is. Cod: 39980001

The ORV laser device is a high performance Green light laser device that can work in any condition even the most demanding ones ideal for places where there are no space constraints. The device is available in output powers from 1mW to 120mW it is dissipated with Thermal Interface Material which guarantees maximum dissipation and extends the MTBF. Its structure is customizable by the customer it can project lines, cross points at a distance requested by the customer, and a power supply 5V 24V 100/240v in direct and alternating current.

The ORT laser device is a high performance Red light laser device that can work in any condition even the most demanding ones, Ideal for places where there are no space constraints The device is available in output powers from 1mW to 100mW it is dissipated with Thermal Interface Material which guarantees maximum dissipation and extends the MTBF. Its structure is customizable by the customer it can project lines, cross points at a distance requested by the customer, and a 5V 24V 100/240V power supply in direct and alternating current. The device is available in different standard configurations

The SET laser device is a high-performance Green light laser device that can work in any condition, even the most demanding ones. It finds ample space in conditions where high power and small dimensions are needed. The device is available in output powers from 1mW to 120mW and is dissipated with Thermal Interface Material which guarantees maximum dissipation and extends the MTBF. Its structure can be customized by the customer, it can project lines, cross points at a distance requested by the customer, and a 5V 24V 100/240V power supply in direct and alternating current. The aforementioned laser has the pride of being completely customizable both in terms of power and housing.

The SET R laser device is a high-performance Red light laser device that can work in any condition, even the most demanding ones. It finds ample space in conditions where high power and small dimensions are required. The device is available in output powers from 1mW to 100mW and is dissipated with Thermal Interface Material which guarantees maximum dissipation and extends the MTBF. Its structure can be customized by the customer, it can project lines, cross points at a distance requested by the customer, and a 5V 24V 100/240V power supply in direct and alternating current. The aforementioned laser has the pride of being completely customizable both in regard to power and housing.

The TB laser device is a versatile and compact device that has been designed for applications where a stable electrical connection or occasional use is not possible. The device is available in output powers from 1mW to 120mW and is dissipated with Thermal Interface Material that guarantees maximum dissipation and extends the MTBF. Its structure is customizable by the customer and can project lines, cross points at a distance requested by the customer.